BATTERY CHARGING Plug the charger in the wall power socket, the indicator light is green in the free-load status. Plug the port of the charger in the ports on the light. (the positive and negative polar does not matter, both ways work.) The indicator light on the charger is red if the battery is not fully charged; it will turn green after fully charged. Take out the charger and use the light.
MODES CHANGING: Successive push the switch ON-OFF within two seconds to cycle through High, Low, strobe, OFF. SCUBA DIVING APPLICATION Check closely for cuts, scratches, or an otherwise damaged O-ring or mating lens surface as this can cause the light to flood under pressure. Remove any salt deposits, sand, dirt, or other foreign matter from the O-ring sealing surfaces. KEEP THE THREADS, O-RING GROOVE LUBRICATED WITH SILICONE GREASE.
